[1] Aldawoud A., The influence of the atrium geometry on the building energy performance, Energy and Buildings (2013) 57: 1-5.
[2] Alzoubi H.H., Al-Zoubi A.H., Assessment of building façade performance in terms of daylighting and the associated energy consumption in architectural spaces: Vertical and horizontal shading devices for southern exposure facades, Energy Conversion and Management (2010) 51(8): 1592-1599.
[3] Cantin F., Dubois M.-C., Daylighting metrics based on illuminance, distribution, glare and directivity, Lighting Research & Technology (2011) 43(3): 291-307.
[4] Lim Y.-W., et al., Empirical validation of daylight simulation tool with physical model measurement, American Journal of Applied Sciences (2010) 7(10): 1426.
[5] Rundle C., et al., Validation of computational fluid dynamics simulations for atria geometries, Building and Environment (2011) 46(7): 1343-1353.
[6] Göçer Ö., et al., Thermal performance simulation of an atrium building, in Proceedings of eSim building performance simulation conference, Faculty of architecture, landscape, and design, University of Toronto, Canada (2006).
[7] Hussain S., et al., Evaluation of various turbulence models for the prediction of the airflow and temperature distributions in atria,Energy, and Buildings (2012) 48: 18-28.
[8] Nasrollahi N., et al., Appropriate Geometrical Ratio Modeling of Atrium for Energy Efficiency in Office Buildings, Journal of Building Performance (2015) 6(1).
[9] Liu P., et al., Evaluation of buoyancy-driven ventilation in atrium buildings using computational fluid dynamics and reduced-scale air model, Building and Environment (2009) 44(9): 1970-1979.
[10] Assadi M.K., et al., Analytical model of atrium for heating and ventilating an institutional building naturally, Energy and Buildings (2011) 43(10): 2595-2601.
[11] Fini A.S., Moosavi A., Effects of “wall angularity of atrium” on “buildings natural ventilation and thermal performance” and CFD model, Energy and Buildings (2016) 121: 265-283.
[12] Erlendsson Ö., Daylight optimization: A parametric study of atrium design, Y. Lisans Tezi. School of Architecture and the Built Environment, Stockholm (2014).
[13] Ghasemi M., et al., The influence of well geometry on the daylight performance of atrium adjoining spaces: A parametric study, Journal of Building Engineering (2015) 3: 39-47.
[14] Doheim R., et al., The impact of atrium shape on natural smoke ventilation, Fire safety journal (2014) 63: 9-16.
[15] Mohsenin M., Hu J., Assessing daylight performance in atrium buildings by using Climate Based Daylight Modeling, Solar Energy (2015) 119: 553-560.
[16] Du J., Sharples S., Daylight in atrium buildings: Geometric shape and vertical sky components, Lighting Research & Technology (2010) 42(4): 385-397.
[17] Tabesh T., Sertyesilisik B., An investigation into energy performance with the integrated usage of a courtyard and atrium, Buildings (2016) 6(2): 21.
[18] Radhi H., On the optimal selection of wall cladding system to reduce direct and indirect CO2 emissions, Energy (2010) 35(3): 1412-1424.
[20] Ghiabaklou, Z, Fundamentals of building physics 5: Daylighting (2013) 88, ISBN 978-964-210-167-2, Jihad Amirkabir University.